The composition of glass beads ： SiO2 >67%, CaO>8.0% MgO>2.5% Na2O<14%, 　Al2O3 0.5-2.0 Fe2O3>0.15 other 2.0%

Glass Beads of size 710 microns and below are being used as a reinforcement filler in the plastic industry. Depending on the job, bigger sizes are also being used. Spherical shape gives better stress patterns than the irregular shaped particles conventionally used. Glass beads are easily and uniform

Retroreflectivity refers to the part of incident light from headlights of a vehicle being reflected back to the driver. Retroreflectivity is normally achieved in road marking materials by using glass beads or ceramic beads.AdvertisementsThese beads are sprayed on the marking materials when the road

Recent collaborative European research has established that the minimum distance at which road markings should be visible to drivers must be equivalent to two seconds of travel time5. Several factors decide the distance at which a road marking is visible.4,5Most of them are related to the driver, fo

Usually, the glass beads used in road markings have a refractive index ranging between 1.5 and 1.9. They are developed in a wide range of sizes from 100 to 1500 microns in diameter and with different degrees of roundness. During production, glass beads can be combined into the road marking material

When a beam of light falls on a single layer of Glass Beads embedded in a Reflective or Opaque Medium such as lacquer or pointed surface it is reflected back with a brilliant glare less glow during day and at night thereby increasing the visibility. Each beads acts like a lens or prism the incident

GRINDING AND DISPERSING MEDIA :Glass beads are the main points of contact where energy from the mill is transferred to the pigment particles, causing reduction in their size. Since the Glass beads are the actual perpetrators of attrition on the pigment particles, by increasing the number of beads or

Agricultural Products This grade of Glass Spheres are used for grinding, dispersing, and deagglomerating a variety of agricultural products, because they are chemically-inert and will not introduce ferrous or other metal residues into the food products. And, since they are non-absorbent and impervio

Adhesives Application Landscapus Inc offers a wide range of specified glass micro spheres, specifically designed for controlling and defining bond line thickness in adhesives.In general, 90% of the product fits within a very tight gradation specified (Product Specs Line). These products meet the re

ApplicationRecommend ProductsAdhesivesSolid Glass micro spheresAgricultural productsSolid Glass micro spheresAutomotive & Marine PuttyHollow Glass micro spheresCoatings, Adhesives, Inks & PastesConductive ParticlesCompositesHollow Glass micro spheresConstruction MaterialsHollow Glass micro spheresCo