GB/T-24722-2009 International Standard
Product Description
SECTION I: MANUFACTURER&MATERIAL IDENTIFICATION
Product Glass Beads H.S.CODE:70182000.90
CAS 13870-30-9
Date prepared Revised 01/10 SECTION II:HAZARDOUS
INGREDIENTS/IDENTITY INFORMATION
HAZARDOUS COMPONENTS CAS# PEL(ppm) TLV(ppm)
No hazardous components Mixture N/A N/A
SECTION III:PHYSICAL/CHEMICAL CHARACRISTICS
Boiling point(℃) ＞93 Specific Gravity(H2O=1) N/A
Vapor Pressure(mm Hg) N/A Melting Point(℃) N/A
Vapor Density (AIR=1) N/A Evaporation Rate（Butyl Acetate=1） N/A
SECTION IV: FIRE AND EXPLOSION HAZARD DATA
Flash Point(℃) None
Flammable Limits N/A
Extinguishing Media CO2 Water spray,Dry chemical,Foam
Special Procedures SCBA recommended
Unusual Fire&Explosion Hazards None known
SECTION V:REACTIVITY DATA
Stability Stable
Conditions to Avoid None known
Incompatibility Strong oxidizers
Hazardous Decomposition Will not occur
Hazardous Polymerization Will not occur
Application
Intermix This type glass beads are premixed in marking materials on the ratio of 18-25 %( weight percentage) before application.
Drop onThis type glass beads are dropped or sprayed into the wet paint directly behind the paint sprayer.
Packing
25KG PLASTIC WOVEN BAG Using double-deck package, normally, 48bags/pallet, total 20 pallets put in one 20 ft container.
1000KG-1200KG BIG BAG Using double-deck package, the inner is polythene film and its thickness is not less than 0.5mm,normally, 20 bags put in one 20ft container.